How to Care for Bone Inlay and Mother of Pearl Furniture

Soft cloth resting near ivory floral furniture inlay, highlighting the delicate surface

A cold glass on an inlay nightstand can leave a little pool of water long after the glass has gone. A vase can do the same on a sideboard. Looking after bone inlay and mother-of-pearl furniture starts with these ordinary moments, and with knowing which finish the maker applied over the decorated surface.

Dust gently and regularly

Use a clean, soft, dry microfibre cloth to lift loose dust. A soft brush may help in recessed decorative areas. Avoid stiff brushes, scouring pads and aggressive rubbing, which can scratch a finish or damage small details. Do not assume a general household cleaning product is safe for inlay.

Make a small care kit for the actual piece

Keep two clean, soft cloths close to the furniture. Use one only for loose dust and keep the other dry for spills. A cloth that has picked up grit from a shelf or polish from another table can leave a mark of its own. Remove rings or bracelets that might brush against a glossy top as you work. Lift the lamp and any decorative objects so you can see the surface underneath.

A mixed-material piece may need more than one approach. On a box with inlay on the outside and fabric on the inside, for example, the care instructions for the lining do not automatically apply to the lid. Lift a lid by its intended grip. If there is a raised edge in the decoration, leave that area alone and ask the maker to look at a photograph.

Black decorative inlay storage box with pale shell motifs and a hinged lid
The decorated lid, hardware and lining of a mother-of-pearl storage box each call for their own care. View the inlay box.

Protect against moisture and heat

Use coasters beneath glasses and protective mats beneath warm objects. Blot a spill promptly using a soft cloth; do not let liquid remain on the surface or run into joints. Avoid steam cleaning and soaking. If a mark remains, ask the manufacturer for finish-specific guidance instead of trying stronger chemicals.

What to do after a spill or when a ring appears

Lift the glass and blot the liquid with the spare cloth, changing to a dry part as it absorbs moisture. Look along the nearest seam and at the edge of the top. A small trickle can travel further than the patch you first see. Once the visible liquid has been lifted, leave the area uncovered and let it dry at room temperature. Keep the glass and its coaster elsewhere in the meantime.

If a ring or dull patch remains, take one picture from above and another with light falling across it from the side. Note what spilled and what, if anything, has touched the mark since. Send those details with the order reference to the maker. The decorative material, infill and coating can respond differently to a cleaning product, which is why a remedy for a solid brass tray or a wooden chopping board is a poor starting point for an inlaid tabletop.

Choose a suitable position

Keep furniture away from persistent direct sunlight, radiators and damp areas. Excessive temperature and humidity changes can affect wood and its finish. In a bright room, light curtains can reduce direct exposure while maintaining the natural atmosphere. When moving a piece, lift it with suitable help rather than dragging it across the floor.

What about polish, wax or repairs?

Do not apply polish, wax, silicone or oil unless the product's care instructions allow it. A sheen on mother of pearl comes from the material itself and should not be created with abrasive polishing. If you notice a loose inlay piece, a crack or a raised edge, stop cleaning that area and contact the seller or a qualified furniture restorer.

A small habit with long-term value

Regular gentle dusting and simple surface protection are easier than attempting to reverse damage later. Discover our bone inlay and mother of pearl furniture and check the care information relevant to your chosen item.